|
|
|
Honing
machine automatic MDR 240 NC (double-spindle)
|
|
Technical
data:
- Honing range with
automatic stroking Ø 1,5 - 50 mm
- Honing range
without automatic stroking Ø
0,6 - 70 mm
- Spindle speed 150
- 2500 RPM over central motor
- Spindle motor 2,2
kW
- The round-running
precision of both spindles is always garantees and does not require any
adjustment
- 2 floating
universal clamping unit
- Honing oil
container 45 l with pump and filter insert
- Machine
lamp
- Weight ~ 900
kg
- Dimensions 1600 x 1000
x 1600 mm
Accessories:
- Honing
apparatus
PEMAMO 814 for Ø 0,6 - 1,5 mm
- Divers automatic
feeding systems
- Automatic paper
tape filter unit
Automatic
expanding system AR 340 NC and numerical control
Advantages
of this system:
- Each of the two
micrometric expansion systems offers the unique possibility to hone with
constant expasion speed or with constant expansion pressure
- The very precise,
micrometric expansion system guanatees perfect adjustments for getting
the best possible performance during roughing of finishing
operations
- Changes of the
honing Ø are possible even during the honing operation in steps of ± 0,0001 mm
or 0,001 mm
- The stock removal,
expansion speed, expansion pressure, honing time, final Ø as well the number of
parts honed are permanently indicated during the honing operation
Technical data:
- Expansion speed
from 2 - 300 sec. for 0,02 mm expansion of the hone, separate for each
spindle
- Automatic stop
after having reached the desired Ø, separate for each spindle
- Dwell from 0 - 60
sec. separate for each spindle
- Automatic return to the Ø of deparature,
shrinking
depending on stock removal, separate for each
spindle
- Automatic
fast/slow approach starting from Ø 5 mm is reducing the idle time to a minimum,
and lessen the cycle time up to 50 % or more, separate for each
spindle
- 99 honing programs
can be stored
Automatic
stroking / Honing table
Advantages:
- No time consuming
adjustments of hone and hone spindle to achieve true-running
- 2 workpieces or
workpiece packages can be honed at the same time
- Very good
acces
- An important
advantge is the fact, that the table can accept up to 40 kg. This means that 2
heavy parts can be honed without needing a vertical machine
Technical data:
- Stroking speed
from 0 - 180 <=>/min. over central motor
- Stroking length
adjustable from 0 - 100 mm
- Maximum honing
length ~ 120 mm
- Honing table with
separate motor 0,55 kW
- Honing table can
be loaded with 40 kg
Universel
clamping / Special clamping:
- All workpieces are
clamped in a floating manner, automatic or manually
- Extrem short
installation and preparation time
- Very easy handling
and good acces
- Clamping units
foreseen for automatic loading/unloading systems
- Universal clamping
units for workpieces different Ø, lengths and shapes
- Clamping units for
workpieces up to 6 kg
|
|
